Brought to you by woodworkers like you through patreon!
We’re talking about how our shops and working styles might be different if we didn’t have our respective businesses.
Router-cut mortises, demystifying plywood, solid or ply bathroom vanity,
whether to join a local woodworking guild
Trimming a frame flush to the top, Thousand Canker Disease, and selling your old tools.
On today’s weekend show, we’re talking about the end game in our businesses.
On today’s show we’re talking about if the finish is ruined once it starts curing in the can and giving up on a tool or
On today’s weekend show, we’re talking about woodworking away from home. What Are We Talking About Darth Rust asked: I’m overseas for the rest of
Vertical vs horizontal lumber storage, finishing uneven Cherry, and being neighborly.
Today we’re keeping it real by talking about safety advice we don’t adhere to.
Our sharpening set ups and what we use to draw blood.
On today’s show, we’re talking about small dados and clamping squares!!
We discuss projects we’ve made for no reason other than to have fun.
Card scraper thickness, what’s your highest grit before finishing, and asymetrical dovetail layout
Chisel recommendations for a newb, when to stop face jointing, static explosions, and movement in manufactured furniture
Today we’re discussing lumber prices and regional variability.
Plywood vs solid wood for panels, electrical draw from a saw mill, and french cleats.
When do you push yourself with your design? Does going out on a limb automatically mean that some people will hate it?
The joy of tracksaws, strength of loose tenons, and getting into welding.
On a recent trip to Michaels Craft Store, Shannon was disgusted by all the junk on the shelves purporting to be Maker kits.
Extra jointer support, taming tapers, diamond vs water stones, and leaving the bark on slabs.
We’re taking 2 questions on workbenches: top material and the effectiveness of the deadman
Live edge table bases, air dried vs kiln dried lumber, and Stationary log vs stationary head mills.
YouTube and Fine Woodworking as well as getting sponsors.
Long-term tool storage, selling at craft shows, and quartersawn lumber.
We each name an accessory that makes life easier.
Glue line seams, dowels vs floating tenons, and a sawmill cnc router conversion.
Talking about the wood products in our home and how we feel about them.
Casket joinery, dust collection for a small shop, and table top board direction
Staining complex projects, Matt’s building a solar kiln?!?!, and wood movement in wide boards.
Favorite finishing books, to sharpen router bits or not, miter saws vs table saws, and plywood with hand tools???
Our woodworking goals and resolutions for 2017.
Epoxy shelf life, stropping, and bandsaw blade life expectancy
Is it better to buy the better quality tool or the lower quality and get accessories?
Router bit buying strategy, lathe tool recommendations, jointer planes, and where to put the drill press.
Some of the risks and pitfalls of running an online business.
Shop sub-floors, files for restoring saws, basement woodworking, purpleheart resin, acute angles, and making big projects in small spaces.
When to use your air cleaner, tensioning a bandsaw blade, planing a glued up carcass.
What are the big Black Friday deals we have seen in the past and what have we taken advantage of.
Oil finish in a low powered turbine, installing opposing drawer slides, and notching corners.
Your co-hosts as kids. What were we into? Anything that showed aptitude for woodworking or video-making?
Oil and wax finish on a butcher block, wall storage in a concrete walled shop, and starting a business.
Our thoughts on where to get tool-buying advice.
Using a frame and panel for a tool chest door, fixing an orange peel lacquer finish, and narrow piece kickback.
On today’s weekend show, we’re talking about camcorders vs DSLRs and how we use them in our shops. What We’re Using Marc has a Sony PXW-Z-150
On today’s show, we’re talking about glossy wood without finish, choosing woods for your design, how much wood for a workbench. What’s On the Bench
What power would you steal from one of your co-hosts?
On today’s show, we’re talking about setting your miter gauge to square, wood hardness scales, and T1-11 for the shop walls. What’s On the Bench
Tricky double-sided tape, buying your first backsaw, and router tables.
Learning to sharpen saws, shop lighting options, and where do you get your horse butt.
Oil stones vs water stones, how to avoid mistakes related to rushing, and setting pricing expectations
curved cauls, who need’s ’em!, what’s matt going to do with all of those slabs, what’s the deal with Purpleheart, and all kinds of backwards sawing and softwood only Japanese woodworking questions for our guest host Wilbur Pan.
Today’s show is sponsored by Brusso Hardware. Use the code “Woodtalk” to save 10% off our first order at Brusso.com On today’s show we’re talking
Getting hot with epoxy, outdoor bar top options, and jointing a strip of moulding by hand.
On today’s show, we’re talking about practicing dovetails, differences between gravity and syphon HVLP guns, keeping our shops organized, and period furniture resources. Want to
Choosing joinery, sanding small pieces without rounding them over, hand planing crowns, and glueing up joints.
Disposing of sawdust, using PT lumber, and how much to let panels float.
Knowing when your planer and jointer blades are dull and including torsion box assembly tables in small spaces.
Ductless Mini Splits VA PTAC in the shop, cutting accurate miters, sticky poly, and dealing with dank basements.
Poly getting thicker, green lumber, and some voicemail roulette.
Sharpening stone contamination, dealing with hardware on our projects.
Today’s show is sponsored by QALO. These rings are incredibly comfortable and start at just $15.99. Head to qalo.com, and use the discount code “WoodTalk”
On today’s show we’re talking about keeping your shop clean and working in the heat. What’s On the Bench Marc went Kerouac on everyone’s ass
Finish on a shower stool, hand cut miters, and building a shop on a budget.
Sheet goods for exterior use, Japanese saws vs western saws, and tool recommendations gone wrong.
Hand tool fatigue, using a woodworking miter saw as a metal cut-off saw, and the right finish for furniture in a rental property.
An in-depth discussion about what’s going on in our shops and we offer some general woodworking wisdom (if we have any)!
Attaching a butcher block top to a base, getting started in woodcarving, 110v jointers, and our featured topic, how to deal with shop frustration and maximizing limited time.
Dealing with pitch in your 2×4’s, rabbets planes, back pain, and how often function dictates our wood choice.
End grain orientation for panels, smoothing a bookmatched panel, scraping glue, and our featured topic, the Festool Domino vs the world!
Sanding between coats, spalting your wood for fun and profit, resaw or plane, and hobbies outside of woodworking.
Mallets & chisel handles, protecting our electronic gear in the shop, shop security, keeping walnut from fading, and our featured topic, how much rehab can you do on a tool before it loses its soul?
jointing woes, router planes, breadboard ends, and our featured topic, how has video production impacted our woodworking.
We’re talking about chisel handling, lubing plunge posts, and choosing hardware
On today’s Anniversary/April Fool’s show we’re talking about clamping out gaps, prepping old cabinets for new paint, and securing socket chisel handles.
Today’s show is brought to you by Harrys.com where you can get high quality razors in the mail at a fraction of the cost from
Today’s show is sponsored by Harry’s where you get low cost, high quality razors. Woodtalk listeners can use coupon code ‘WOODTALK’ for 10% off your
Today’s show is sponsored by Harry’s where you get low cost, high quality razors. Woodtalk listeners can use coupon code ‘WOODTALK’ for 10% off your
Today’s show is sponsored by Harry’s where you get low cost, high quality razors. Woodtalk listeners can use coupon code ‘WOODTALK’ for 10% off your
Cutting a juice groove in a cutting board, planers and Pine, bench top mortisers, power carving tools for bowls, and our strategies for dealing with squeeze out.
Trouble with a Mission Oak Finish, saw tooth geometry, grain direction in a panel, finishing all sides of a board at once, heating a workshop, project stability when shipping across the country, proper clamping pressure, and our Featured topic: how to do Woodworking in America right!
WoodTalk Roulette where we will grab emails from the mail bag at random and answer them.
Designing your own projects, biscuit depression, starting a saw, and attaching a table top.
Our lathe situations, first tools for the hybrid woodworker, knockdown hardware, and bench vs. mortise chisels.
Getting internet into the shop, listening to audio while woodworking, how flat is flat enough, and how thick to cut lumber.
Differences between rubber gloves, cleaning up squeeze out, troubleshooting an underperforming scraper, and letting boards rest after milling.
The intimidation of getting started, 45 degree zero clearance inserts, using a carbide bandsaw blade, and choosing a dust collector.
Removing mill marks in boards, dovetail orientation for casework, non traditional table designs with regard to wood movement, the trend of sped up woodworking videos, moving from a dry climate to a humid one, being called carpenter instead of woodworker, and a look back at the project’s we’ve made in 2015.
Furniture safety, cutting notches, and buying a first spokeshave. Oh yeah, Matt’s leaving the show too.
